Description
C10 sensors are radially symmetrical force transducers for compressive forces. The output signal is higher than that of other load cells (up to more than 4 mV/V), thus enhancing the resolution and the noise/signal ratio of your measurement chain. The C10 series is a benchmark in accuracy, made from rust-free materials, and various configuration options are available for current market prices.
- HBK accuracy class: 0.02 … 0.05
- Capacities: 2.5 kN … 1 MN
- Output signal: mV/V (passive, Wheatstone bridge) and IO-Link
New: With the new option “VAIO”, the C10 comes along with an integrated digital amplifier. Your advantages:
- Greater precision: Linearity error 0.005 % for capacities up to 250 kN, higher capacities improved to 0.03 %. TC0: 0.006 %/ 10 K.
- Improved reliability: The Sensor Health monitoring of the C10 sends warnings in case of exceeding temperature or mechanical limits before problems occur.
- More information: Temperature measurement, statistical information.
- Lower costs, easy setup: The C10 with the VAIO option comes along as adjusted sensor. When connected to an IO-Link master, you will get immediately precise readings in Newton. Low cabling costs.
- Standard instrument features: Limit switches, peak detection, digital output, filter.
- Fast: Internal sampling rate: 40 kHz, 0.9 ms cycling time to the IO-Link master.
Advantages of all C10:
Improved precision:
- TC0 of only 75 ppm/ 10 K, with digital output just 60 ppm/ 10 K.
- Minimal non-linearity, small hysteresis and excellent repeatability (0.025 %).
- High output signal of greater than 4 mV/V (from 25 kN capacity). Also available: Integrated amplifier.
Economical: Wider measurement range means the same accuracy with fewer sensors – and fewer rejects in production. Even improved with IO-LINK option.
Adaptable usage
- Made of rust-free material.
- IP68 degree of protection (with cable option).
- Not affected by lateral force and eccentric load application.
- Vibration resistant.
- EMC approved.
Reliable under harsh environmental conditions, even with electromagnetic fields.
Flexible configuration
- Flexible configuration options.
- Over 10,000 combinations available at short delivery times.
- Different connector and cable options, TEDS, double-bridge versions available, etc.
- Accessories available separately: thrust pieces, connection cables, calibration services.
- Available with integrated digital amplifier.
Sensors can be matched to the measurement task. Plug-and-play solutions save time and reduce likelihood of installation errors. With integrated IO-Link option even more economical and precise.
